Warm spots on the floor with no explanation
We use thermal imaging cameras to confirm the hot line, isolate it, and repair the break. Most hot-water slab leaks are fixed in a single visit, and we pressure-test before patching.
When a slab leak floods your floor at 2 a.m., you need Emergency Slab Leak Repair in Plano that answers the phone and shows up. We serve homeowners across Collin County with 24/7 slab leak repair Plano TX service, using electronic leak detection and thermal imaging to pinpoint the break before we open any concrete. Call now and we'll stop the water.

Emergency Slab Leak Repair in Plano is a licensed plumbing service that locates and fixes water lines leaking beneath a concrete foundation, usually within hours of your call. We start with electronic leak detection equipment and acoustic listening devices to hear the leak through the slab, then confirm the exact spot with thermal imaging cameras and pressure testing kits. Once we know where the pipe failed, we repair or reroute it and patch the concrete with matching compound so your floor looks untouched.
Plano homes sit on expansive clay soil that shifts with every wet and dry cycle, and that movement stresses copper pipe and PVC pipe under the slab until a joint cracks. Add summer ground temperatures that push 100 degrees and winter freezes that can burst an exposed line, and you get water line breaks that show up as warm spots on the floor or a high water bill you can't explain. If you've been searching for emergency slab leak repair Plano TX near me at midnight, we're the crew that picks up.
Every emergency call includes detection, repair, pressure testing, and concrete patching. Here's what's covered in the standard price and what we handle as an add-on if your line needs more than a spot repair.
We use acoustic listening devices and thermal imaging cameras to locate the break before opening concrete. This is included in every emergency call and is what keeps the access hole small.
We repair the failed section with copper pipe, PEX tubing, or a pipe clamp and solder joint as the line requires. If the line is too far gone, we reroute it through the attic or walls instead of tearing up more slab.
Before we close the slab, we pressurize the repaired line and hold it to confirm the fix. You see the gauge reading, and we don't patch until it holds steady.
We fill the access hole with concrete patching compound and match the surrounding surface as closely as possible. The patch is structural and finished, not just a rough fill.
If water is standing under your flooring, we extract it and set up drying equipment to limit mold growth from leaks. This is included when the leak has been running for a while.
You call and reach a live dispatcher, day or night. We ask where the water is showing up, whether you've shut off the main, and your ZIP code so we send the closest truck. Most Plano addresses see a technician within 60 to 90 minutes.
Our technician walks the slab with acoustic listening devices and a thermal imaging camera, then confirms the reading with a pressure testing kit. You get a clear explanation of where the leak is and what the repair involves before any concrete is opened.
We shut off the affected line, cut a small access point, and repair the failed section with copper pipe, PEX tubing, or a pipe clamp and solder joint as the line requires. Most repairs take two to four hours once we've located the break.
Before we close anything up, we pressurize the repaired line and hold it to confirm there are no secondary leaks. If the test drops, we keep working until it holds. You see the gauge reading yourself, so there's no guesswork.
We fill the access hole with concrete patching compound, match the surface as closely as we can, and clean the work area. You get a walkthrough of the repair, a warranty on the work, and a dry floor before we pull out of your driveway.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
We use these to hear the sound of water escaping through the slab and narrow the leak to within a few inches before we open concrete.
Thermal cameras show temperature differences on the floor surface, which makes hot water slab leaks visible without any demolition.
We run the camera through drain lines and accessible pipes to see cracks, root intrusion, and joint failures that pressure testing alone can't show.
We isolate sections of the water line and pressurize them to confirm which section is losing water and to verify the repair holds before patching.
These tell us how far water has spread under flooring and into walls, so we know what to dry and whether mold growth from leaks is a risk.
We use pipe locators to map the line under the slab before we cut, which keeps the access hole small and avoids hitting other utilities.
For lines that can't be dug up, we use trenchless equipment to repair or line the pipe with minimal excavation, saving concrete and landscaping.
A homeowner in Willow Bend noticed a warm strip on the hallway floor and a water bill that had climbed by $180 in one month. The slab was dry to the touch, but a thermal camera showed a hot water line leaking under the tile.
We isolated the hot water line, cut one 18-inch access hole, and repaired the copper pipe in about three hours. The pressure test held at 80 psi, and the concrete patch matched the surrounding slab. The water bill returned to normal the next cycle.
A family in Legacy West called at 11:40 p.m. when water started seeping from under the baseboard in their downstairs hallway. The main was still on, and water was spreading across the engineered hardwood floor.
We walked them through shutting off the main, arrived by 12:45 a.m., and found a failed PEX fitting with acoustic gear. The repair took two hours, and we extracted the standing water before we left. The flooring dried without replacement.
A Deerfield homeowner's water bill doubled for two months, but no water was visible anywhere in the house. The meter spun with every fixture off, which pointed to a slab leak on the cold water line.
Electronic leak detection narrowed the leak to a 3-foot section under the kitchen. We repaired the copper pipe, pressure-tested at 75 psi, and patched the slab in one visit. The next bill dropped by $140.
A slab leak shows up in ways that don't always look like a plumbing problem. Here are the signs Plano homeowners call us about most often, and what happens if they're ignored.
Ask a pro →We use thermal imaging cameras to confirm the hot line, isolate it, and repair the break. Most hot-water slab leaks are fixed in a single visit, and we pressure-test before patching.
Our electronic leak detection equipment finds the line that's losing pressure, even when the leak isn't visible. We repair it and show you the before-and-after meter reading.
We locate the source with moisture meters and acoustic gear, stop the leak, and extract standing water. We also check the surrounding area for mold growth from leaks before we close the job.
We fix the leak first, then assess foundation moisture. Stopping the water is the priority, and we patch the slab access point with concrete patching compound so the repair is solid.
Most emergency slab leak repairs in Plano run $450 to $2,500 in 2026, with detection alone at $150 to $400. The final price depends on where the leak sits, whether we repair or reroute the line, and how much concrete patching is needed. We quote the full repair before we start, so you know the number before the slab opens.
We typically arrive within 60 to 90 minutes of your call anywhere in Plano, including nights and weekends. Our dispatcher sends the closest truck and gives you an arrival window when you call. If water is actively running, we walk you through shutting off the main while the technician is en route.
Yes, we schedule prompt detection and repair whenever parts and access allow, and most jobs are completed in one visit. We carry copper pipe, PEX tubing, and common fittings on every truck, so we can repair most breaks without a second trip. Call early in the day for the best prompt availability.
Our team offers 24/7 slab leak repair across Plano and Collin County, with a live dispatcher answering every call. We serve all Plano ZIP codes, including 75093, 75025, and 75075, and we quote the repair price before work begins. Call and we'll confirm the next available arrival window.
Water under your floor won't wait, and neither should you. Call our 24/7 line and a live dispatcher will send a licensed technician with detection gear and repair parts. We quote the price before we start and stand behind the work.
Call Now +1 (972) 544-0575 →Call us any hour at (972) 544-0575 for slab leak detection and repair in Plano. We answer 24/7, including holidays, and most detection visits are scheduled the same day. If water is actively running, we treat it as an emergency and dispatch immediately.